Basler A600f Bedienungsanleitung Seite 20

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 180
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 19
Camera Interface
2-4 BASLER A600
f
DRAFT
2.2 Cables
The maximum length of the IEEE 1394 cable used between the camera and the adapter in your
PC or between the camera and a 1394 hub is 4.5 meters as specified in the IEEE 1394 standard.
Standard, shielded IEEE 1394 cables must be used.
The maximum length of the I/O cable is at least 10 meters. The cable must be shielded and must
be constructed with twisted pair wire. Close proximity to strong magnetic fields should be avoided.
2.3 Camera Power
Power must be supplied to the camera via the IEEE 1394 cable. Nominal input voltage is
+12.0_VDC, however, the camera will operate properly on any input voltage from +8.0 VDC to
+36.0 VDC as specified in the IEEE 1394 standard. Maximum power consumption for the A600
f
is 1.7 W at 12 VDC. Ripple must be less than 1%.
2.4 IEEE 1394 Device Information
The A600f uses an IEEE 1394a - 2000 compliant physical layer device to transmit pixel data.
Detailed spec sheets for devices of this type are available at the Texas Instruments website
(www.ti.com).
Caution!
Use only standard IEEE 1394 connectors.
The polarity of the input power to the camera must be as shown in Table
2-1. Do not reverse the input power polarity. Reversing the polarity will
damage the camera.
Seitenansicht 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare