Basler A400K Bedienungsanleitung PDF herunterladen (Seite 42)

Physical Interface AW00118501000

34 Basler racer Camera Link

Setting an Input Line for Invert Using Direct Register Access

To set the invert function on an input line via direct register access:

 For the CC1 line, set the value of the Line Inverter CC1 register to 0 (false) or 1 (true) as

desired.

 For the CC2 line, set the value of the Line Inverter CC2 register.

 For the CC3 line, set the value of the Line Inverter CC3 register.

 For the CC4 line, set the value of the Line Inverter CC4 register.

For more information about direct register access, see Section 3.2 on page 16.

5.6.1.3 Selecting an Input Line as a Source Signal for a Camera

Function

You can select an input line as the source signal for the following camera function:

 the Line Start Trigger

Note that to use an input line as the source signal for a camera function, you must apply a signal to

the input line that is appropriately timed for the function.

For detailed information about selecting an input line as the source signal for the camera’s Line Start

Trigger function, see Section 6.1 on page 43.

Default Input Line Selection

Line CC1 is selected as the source signal for the camera’s Line Start Trigger function.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 129 130

Keine Kommentare

Basler A400K Bedienungsanleitung Seite 42