Basler A501k Bedienungsanleitung PDF herunterladen (Seite 23)

Camera Interface

Basler A500

k 2-7

PRELIMINARY

2.1.5 Pin Assignment for the VGA Monitor Output

(A504k/kc Only)

The 15 pin HDSub receptacle for the VGA monitor output transmits 640 x 480 pixels at a rate of

60 fps.

2.2 Cable Information

2.2.1 Camera Link Cable

The Camera Link specification requires the use of a standard MDR cable assembly manufactured

by 3M

™ (part # 14X26-SZLB-XXX-0LC).

The maximum recommended allowed length for the MDR cable used with an A501

k/kc is 7 meters.

The maximum recommended allowed length for the MDR cable used with an A503

k/kc or

A504

k/kc is 5 meters.

A Camera Link compatible MDR cable assembly is available from Basler as a stock item (part #

1000013905 for a 3 meter cable and part # 1000013906 for a 5 meter cable). Alternatively, you

can use the cable assembly manufactured by 3M (part # 14X26-SZLB-XXX-0LC). The A501

k/kc

can also use a base configuration Camera Link cable. See the cable information on the Basler

website www.basler-vc.com.

Number

Signal

Name

Direction Function

1 Red Video Output Red Video

2 Green Video

Output Green Video

3 Blue Video

Output Blue Video

4, 9 not connected

5, 6, 7, 8,

10, 11

DC GND Output DC Ground

12 not connected

SDA is not supported

13 HSync

Output HSync, 5 V TTL signal

VSync Output VSync, 5 V TTL signal

not connected SCL is not supported

Table 2-5: A504k/kc Pin Assignments for the VGA Monitor Output

The maximum cable length will decrease when used in an area with severe ambient

electromagnetic interference.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare

Basler A501k Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern