Basler A501k Bedienungsanleitung PDF herunterladen (Seite 118)

Configuring the Camera

4-20 Basler A500k

PRELIMINARY

4.2.4.13 Area of Interest Starting Line

4.2.4.14 Area of Interest Height in Lines

Purpose: To set the starting line for the Area of Interest or to read the current starting pixel setting.

See section 3.11 for details.

Type: This is a read or write command.

Read Command: Cmd-ID R/W-Flag Data Length Data

0xA8 1 2 -

Response: Cmd-ID R/W-Flag Data Length Data

0xA8 0 2 2 Bytes

Write Command: Cmd-ID R/W-Flag Data Length Data

0xA8 0 2 2 Bytes

Response: None

Data Format: Byte 1 Low byte of the starting pixel setting

Byte 2 High byte of the starting pixel setting

Data Range: The starting line setting can range from 0x0000 to 0x03FF. For color cameras,

it can only be set in steps of 2. (Note that the starting pixel = n +1 where n

is the value of the starting pixel setting.)

Purpose: To set the height in lines for the Area of Interest or to read the current height setting. See

section 3.11 for details.

Type: This is a read or write command.

Read Command: Cmd-ID R/W-Flag Data Length Data

0xAA 1 2 -

Response: Cmd-ID R/W-Flag Data Length Data

0xAA 0 2 2 Bytes

Write Command: Cmd-ID R/W-Flag Data Length Data

0xAA 0 2 2 Bytes

Response: None

Data Format: Byte 1 Low byte of the length in pixel setting

Byte 2 High byte of the length in pixel setting

Data Range: The height in lines setting can range from 0x0002 to 0x0400. For color

cameras, the height can only be set in steps of 2 starting at 0x0002.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 149 150

Keine Kommentare

Basler A501k Bedienungsanleitung Seite 118