Basler BIP2-DXXXXc-dn Installationsanleitung PDF herunterladen (Seite 26)

Installation Guide AW00101404000

24 Basler IP Fixed Dome Cameras

4 Adjust the Aim, Zoom, and Focus

When adjusting the aim, zoom, and focus, view the live image stream in the

Basler Surveillance Web Client.

To adjust the aim:

1. Position the camera head so that the lens is aimed at your desired viewing

area.

You can tilt, pan, or rotate the camera head as shown in the drawing on the

next page. It is not necessary to loosen any screws to tilt, pan, or rotate the

camera head.

a. To tilt the camera head, grasp the camera head itself (not the lens!) and

tilt the head up or down. The amount that you can tilt the head is

mechanically limited.

b. To pan or rotate the camera head, grasp the sides of the rotation

carriage. While grasping the sides of the rotation carriage, you can turn

either the panning plate or the rotation carriage. The amount that you

NOTICE

Using incorrect procedures when aiming the camera head can severely

damage the camera.

1. DO NOT attempt to aim the camera head by pulling or pushing directly

on the lens.

2. DO NOT over-pan or over-rotate the camera head. Panning or rotating

the camera head too far can damage the cable between the camera

base and the camera head.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 88 89

Kommentare zu diesen Handbüchern

Keine Kommentare