Basler A501kc Bedienungsanleitung PDF herunterladen (Seite 104)

Configuring the Camera

4-8 Basler A500k

PRELIMINARY

4.2.2.4 Write Command

In the normal case, when a write command is sent to the camera, the camera responds with an

ACK.

If the camera receives a write command with an unknown command ID in the descriptor, it will

respond with an ACK but will not perform the write.

After a write command has been issued by the host, the host can verify the write by issuing a

corresponding read command and checking that the returned data is as expected. The host can

also issue a camera status read command (see section 4.2.8) and check the returned data to see

if an error condition has been detected.



For many of the write commands listed in the Tables on pages 5-4-11 through 5-4-

31, only data within a specified range or a specified group of values is valid. The

camera does not perform a check to see if the data in the write command is within

the allowed range or specified group of allowed values.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 149 150

Keine Kommentare

Basler A501kc Bedienungsanleitung Seite 104